Description Of Each Part - Ebyte E95-DTU User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd.
serial
Catalog
number
Transparent
Mode 0
mode
Mode 1 WOR mode
configuration
Mode 2
mode
Mode 3 sleep mode
Note: The radio has the function of power-down saving mode (the factory default setting is transparent
transmission mode), the user needs to switch the corresponding mode according to the M1 and M0 indicators
(effective immediately).

1.4 Description of each part

number name
1 Mode
2 ANT
3 DC
4 RS485
5 PWR
Copyright ©2012–2022，Chengdu Ebyte Electronic Technology Co.,Ltd.
M1 M0 Notes
Serial
Off Off transmission (factory default mode), support special
command air configuration.
Can be defined as WOR sender and WOR receiver,
Off On
support air wake-up
The user accesses the register through the serial port to
control the working state of the radio, and the user can
On Off
configure the radio through the host computer
configuration software.
On On radio goes to sleep
function
Mode switch
button
RF interface
Power interface
RS485
communication
port
Power Indicator
E95-DTU(900SLxx-485) User Manual
port open, wireless
explanation
Working mode switching control
SMA-K, external thread internal hole
DC power input port, crimped port
Standard RS485 interface
Lights up when the power is turned on
open, transparent