Monte Carlo Fan Company 3JVR52 D Series Owner's Manual And Installation Manual page 7

Wall Control Wiring, Installation and Operation
Warning: Before proceeding, be sure to shut off electricity
at main switch or circuit breaker in order to avoid electrical
shock.
Note: Before installing the wall transmitter, place it in OFF
position. (Fig.2)
Make series-wound connection for the wall controller with
HOT wire from house and lead wires from fan.
Connect the black/white wire marked "AC IN L" from wall
controller to the HOT wire from house and then connect the
black wire marked "TO MOTOR L" of wall controller to the
fan lead wire from fan in outlet box. Connect the blue wire
marked "FOR LIGHT" from wall controller to the light lead
wire from fan (fan with light)
Connect green/yellow grounded wire to grounded wire from
outlet box.
Install the wall controller to outlet box using machine screws
provided.
Attach wall plate to wall control unit with screws provided.
(Fig.1)
Operation
This wall controller provides 4 fan
speeds, light on/off and light
dimming control.(Fig.2)
1 - High - , 2 - Medium high , 3 -
Medium , 4 - Low , - Off.
Light on/off and dimming.
© 2022 Monte Carlo Fan Collections
Wall controller
Wall plate
ON and Dimming
Off
Fig.2
7
WHITE (Neutral)
120V/60HZ
Power supply
BLACK (Live)
Black/White(AC IN L)
Blue (FOR LIGHT)
Black (TO MOTOR L)
Green/Yellow (Grounding)
Outlet box
Fig.1
4/2022