Table of Contents
Advertisement
INSTALL SOUND SEAL
1
2
12
Align both sound seal sheets to the
base of the dishwasher. If required, trim
excess felt.
Ensure door swing is unobstructed
before securing the seals using the
provided washers and 4.2 x 50mm
screws.
INSTALL TOE KICK
PRE-FINISHED TOE KICK
1
2
3
4
Measure the distance between the floor
and the base of the door. Refer to the
table and mark out the cut location.
Score at the marked height, snap off
excess material and smooth edges.
Ensure brackets are oriented correctly
before fitting to the panel using 2 x
screws per bracket.
Measure the toe kick depth:
toe kick recess
panel thickness
toe kick depth
-
=
x
42mm
z
Use Z to determine which tooth to
bend back on each toe kick bracket.
Align the brackets to the slots on the
product and slide into place.
Advertisement
Table of Contents
