Table of Contents
Advertisement
Available languages
Available languages
12/2021 Rev. 1.0
EXIT FROM THE WELDING MENU
Select exit and press
.
MANUAL ADJUSTMENT OF TRACTOR DIRECTION
After pressing the shift key number 7, the direction of the tractor during welding is determined by
pressing one of the tractor direction keys.
START/STOP WELDING
Welding is started by pressing the
key.
Welding is stopped by pressing the
key.
LASER MARKER
The laser pointer is used to adjust the position of the welding head. It is turned on/off by pressing the
key.
WIRE FEED COLLECT
Wire feeding and collecting are done with the
and
keys.
Quick operation can be performed by pressing the
key.
LANGUAGE SETTING
To change the language setting, the power of the tractor must be cut first. After this process, press
and hold the
,
and
keys at the same time. While holding down these keys, the
tractor must be energized.
12
Advertisement
Chapters
Table of Contents
