Safety - NURIS TRACTOR User Manual

SAFETY

Please read this manual carefully before operating the equipment. This device should be
used only by qualified personnel. Safe operation is only possible with understanding the
possible risks for health and correct operation of the device. Nuriş Teknoloji is not
responsible for any injury, death, or malfunction of the device due to the improper use or lack of
understanding for the identified risks
ELECTRIC SHOCK CAN KILL: Arc welding machines can generate high voltages during the
operation. Do not touch the live parts such as electrode clamp, work clamp or electrode.
Always use the insulated part of the electrode clamp. Wear protective insulating gloves to
prevent risk of electric shock. Do not touch any damaged cables.
FUMES AND GASES CAN BE DANGEROUS: Welding may produce fumes and gases hazardous
to health. Avoid breathing these fumes and gases. To avoid these dangers the operator
must use enough ventilation or exhaust to keep fumes and gases away from the breathing
zone.
ARC RAYS CAN BURN: Use a shield with the proper filter and cover plates to protect your
eyes from sparks and the rays of the arc when welding or observing. Use suitable clothing
made from durable flame-resistant material to protect you skin and that of your helpers.
Protect other nearby personnel with suitable, non-flammable screening and warn them not
to watch the arc nor expose themselves to the arc.
WELDING SPARKS CAN CAUSE FIRE OR EXPLOSION: Remove fire hazards from the welding
area and have a fire extinguisher readily available. Welding sparks and hot materials from
the welding process can easily go through small cracks and openings to adjacent areas. Do
not weld on any tanks, drums, containers, or material until the proper steps have been
taken to ensure that no flammable or toxic vapors will be present.
ELECTRIC AND MAGNETIC FIELDS MAY BE DANGEROUS: Electric current flowing through
any conductor creates electric and magnetic fields (EMF). EMF may interfere with some
pacemakers, and welders having a pacemaker should consult their physician before
operating this equipment.
WELDED MATERIALS CAN BURN: Welding generates a large amount of heat. Hot surfaces
and materials in work area can cause serious burns. Use gloves and pliers when touching or
moving materials in the work area.
3
12/2021 Rev. 1.0