Table of Contents
Advertisement
Available languages
Available languages
OVERALL DESCRIPTION
Figure 1, Tractor
CONNECTION GUIDE
WARNING: The installation and first operation of the machine should be done by
authorized technical personnel.
SAW WELDING POWER SUPPLY CONNECTION
Figure 2, SAW Welding Power
Supply Connection
Connect the communication cable between the SAW welding power
supply and the tractor. The part to be connected to the tractor is shown
in the figure (Figure 2 -a).
Connect the welding negative (-) cable between the workpiece and the
device.
Connect the welding positive (+) cable between the wire feeder and the
device.
Make sure the ground wire is connected.
6
12/2021 Rev. 1.0
TRACTOR
Parts of the tractor are listed below
(refer to Figure1):
a.
Wire reel bearing
b.
Control Board
c.
Dust Box
d.
Dust Bag
e.
Axis adjustment lever
f.
Air inlet for dust extraction
g.
Dust suction hose
h.
Wire feeder unit
i.
Axis adjustment lever
j.
Laser
k.
Gear
l.
Nozzle
m.
Axis adjustment lever
n.
Car
Advertisement
Chapters
Table of Contents
