OPERATION
CONTROL PANEL
The control panel (Picture 3), allows the user to control all the parameters to start and stop the
welding and monitor the welding current. The user can save 10 different welding programs with
different welding parameters. These parameters can be easily accessed for a desired specific resource.
1. LCD panel
2. Laser on or off
3. Fast wire feed and retraction
4. Starting a welding
5. Stopping a welding
6. Program
7. Shift
8. 'Yes' input
9. Numeric key
10. 'No' input
11. Iron powder stops the engine
12. Forward wire feed
13. Iron powder starts the engine
14. Reverse wire feed
Some keys have secondary functions. These functions are detailed in the relevant sections.
Figure 3, Kontrol Paneli
7
12/2021 Rev. 1.0