Diagnostic Mode; Entering Diagnostic Mode - Fisher & Paykel customer care WH8560P1 Manual

479645
3

DIAGNOSTIC MODE

Entering Diagnostic Mode

3.1
To enter the DIAGNOSTIC MODE:
1. Turn the mains on at the supply and on at the control panel.
2. Press and hold the KEYLOCK
at least 3 seconds, after which time two beeps will sound.
Diagnostic mode may be entered while the product is running.
In Diagnostic mode the following I/O's can be operated.
I/O
Toggle Hot Valve
Cold Valve 1
Cold Valve 2
Rotate Motor Clockwise
Motor Counter Clockwise
Toggle Door Lock On/Off
Heater On/Off
Toggle Pump On/Off
Toggle Recycle On/Off
Self Test Cycle
With the display On, press & hold KEY LOCK and WASH TEMP for 3 Seconds.
and WASHTEMP
Select
Everyday Cycle
Cotton Cycle
Heavy Cycle
Delicate
Easy Iron
Spin Cycle
6
buttons together for
Then Press
Wash Temp Button
Spin Button
Options Button
Wash Temp Button
Spin Button
Wash Temp Button
Spin Button
Wash Temp Button
Wash Temp Button
Wash Temp Button