Model/Size Setting - Fisher & Paykel customer care WH8560P1 Manual

2

MODEL/SIZE SETTING

When the control module is replaced, the correct model / size will need to be set
for the machine.
IMPORTANT: Do not set an 1100RPM machine to a 1400RPM setting, as it will
cause significant damage to the drum, seal and bearings.
With the display Off press & hold POWER. While holding POWER, press SPIN SPEED for 5 Seconds.
1. To set the model and size:
2. Turn the mains on at the supply point and off at the display.
3. Press and hold the POWER button. While holding the POWER button, press
and hold the SPIN SPEED button for 5 seconds.
NB. After 3seconds the machine will beep.
Continue holding both buttons for 2 more seconds and the machine will then
display the model/size in the screen.
1485 – WH8560P
1185 – WH8560J
148A – WH8060P
1475 – WH7560P
1175 – WH7560J
To set or alter the setting, turn the selector to the HEAVY cycle so it is illuminated.
Press the SPIN SPEED button to scroll to the correct model/size option.
Once the correct model/size has been displayed, press the WASH TEMP button to
save the setting.
1 4 8 5
1400RPM 8.5Kgs
1100RPM 8.5Kgs
1400RPM 8.0Kgs
1400RPM 7.5Kgs
1100RPM 7.5Kgs
5
479645