Adsl Configuration - Intellinet 522205 User Manual

7.6

ADSL Configuration

The ADSL Configuration page allows the user to set the configuration for ADSL
protocols.
Trellis: This field allows the user to enable or disable the Trellis Code. By default, it is
always enabled.
Handshake Protocol: This field allows the user to select the ADSL handshake protocol.
Wiring Selection: This field allows the user to enter the wiring selection for the RJ-11.
Tip/Rip is the default for the board without the inner/outer pair relay
Bit Swapping: This field allows the user to enable or disable the upstream bit swapping.
7-7