Bridge Filtering - Intellinet 522205 User Manual

6.6

Bridge Filtering

The Bridge Filtering configuration page allows the user to set the configuration of IP
filtering.
Source MAC: When the bridge filtering is enabled, enter the Source MAC address,
select Block and click Add. Then all incoming WAN and LAN Ethernet packets matched
with this source MAC address will be filtered out. If the Forward is selected, then the
packets will be forwarded to the destination PC.
Destination MAC: When the bridge filtering is enabled, enter the Destination MAC
address, select Block and click Add. Then all incoming WAN and LAN Ethernet
packets matched with this destination MAC address will be filtered out. If the Forward
is selected, then the packets will be forwarded to the destination PC.
Type: Enter the hexadecimal number for the Ethernet type field in Ethernet_II packets.
For example, 0800 is for IP protocol.
6-16