Table of Contents
Advertisement
一、 Precautions
Please read all instruments before use, otherwise the product
may be damaged.
1) The optical module is in the device and the circuit board is exposed, so do not
drop it from a height.
2) This device contains high-precision optical components, so please do not
disassemble without authorization.
3) The module is powered by 12V power supply. A 12V, 10A or higher current
adapter is suitable. Otherwise, it may cause the adapter to overcurrent and power off
when the brightness is increased.
4) DMD flat cable connector has a limited service life, so it is not allowed to unplug
the cable without authorization.
5) It is strictly forbidden to Unplugging the DMD flat cable when the module is
power on condition. This will damage the DMD.
6) Please pay attention to anti-static measures before use. Static electricity will
cause damage to the main chips or DMD.
7) This module is turned on when it is powered on. If it does not work properly,
please contact us.
8) Note: The GUI software version is 2.2.0.6 in this document, and the
operating system is Win10 x64.
1
Advertisement
Table of Contents
