BOPIXEL OPR405 Series Operating Manual

OPR405 Series DLP projector operating manual
一、Precautions for use .........................................................................................1
二、Module Hardware Features ........................................................................... 2
三、Port Description .............................................................................................3
3.1 PCB board port position description .................................................................3
3.1.2 Trigger input--J1 ..........................................................................4
3.1.3 Trigger output--J2 ........................................................................4
3.1.4 JTAG BOUNDARY SCAN--J10 ................................................... 4
3.1.5 Power source 12V--J11 .................................................................. 5
3.1.6 USB connector--J15 ....................................................................... 5
3.1.7 LED control signal--J16 ................................................................. 5
3.1.8 LED drive power--J35 ....................................................................5
3.1.9 I2C connector--J36 ......................................................................... 6
3.1.10 Fan connector--J37 .......................................................................... 6
3.2 LED driver board port position description ...................................................6
3.2.2 RED LED Port--J1 ......................................................................... 7
3.2.3 LED Control signal input--J2 ......................................................... 7
3.2.4 GREEN BLUE LED Port--J3 .........................................................7
3.2.5 Drive power input--J4 .....................................................................7
四、Operating Manual ................................................................................................8
4.1 Product Manual .................................................................................................8
4.2 Software and Documentation ............................................................................8
4.2.1 Software .................................................................................................. 8
4.2.2 Software Installation ............................................................................... 8
4.3 Image Input and Control ................................................................................... 9
4.3.1 Three 8bits combined into a 24bit image ..............................................10
4.3.2 Firmware for making two 24bit images ................................................13
4.3.3 Upload firmware ................................................................................... 15
4.3.4 Set display mode ...................................................................................16
4.3.5 Save picture settings ............................................................................. 18
五、Guarantee ........................................................................................................... 20
Catalogue