Make Firmware - BOPIXEL OPR407 Series Operating Manual

If you want to make the default startup state of OPR407 module according to this
configuration file, you need to make Firmware and burn it into flash. For details, see
the next section.
Note: The Batch file produced in this section cannot be used directly. Please
contact Bopixelg engineers to complete the production of the file.

4.8 Make Firmware

Prepare the required files first.
Original firmware

Available batch file

(1) Use the "Update Flash Image" in the " Firmware" mode to create the firmware,
and click "Start".
38