Table of Contents
Advertisement
4.5 GUI Instruction
4.5.1 Connect module to computer
Connect the power plug to the power connector J10, and the plug model is
43645-0200. The load current of the power supply wire should be more than 10A, and
18AWG or higher wire is recommended. The supply voltage is 12V, and supply
current is 10A. The maximum power of the high-power version of DLP4710LC is
100W. If the power supply is insufficient, the module will shut down automatically.
Use USB Type-C cable to connect computer and DLP4710LC module.
Please use our GUI installation package, or download the latest vision from TI
website. Download address:
The GUI downloaded from the official website may be incompatible with our module
and causes problems.
After connecting the module to the computer and the power supply, open the
GUI software.
Check if the connection button at the bottom left has a green symbol. If not, click
the text in the red box in the above figure, and it will become the green checkmark,
https://www.ti.com.cn/tool/cn/DLP4710EVM-LC.
12
Note:
Advertisement
Table of Contents
