The options under the "IntelliBright" tap are for intelligent brightness
optimization. Not recommended for customers.
The parameters under the "LED current" tap are to adjust the light brightness
manually. Selecting the different colors' enable boxes can turn on the related LED
light. Click "set" button to confirm. However this function will reset when the
projection pattern option is set, and doesn't work at the "internal patterns" mode.
Dragging the pointer on the bar under different colors and clicking "Set" button
can change the brightness. The relation between the current and the pointer position
on the bar varies at different module because of different light sources. So please note
that the values displayed in the boxes are not the real values. One module values
cannot be used as the references for another modules. To acquire the available values,
the advanced control mode is needed, which will be introduced in the later section.
16