Override Mode - Clarion Ungo S100 Owner's Manual

override mode

You can prevent your security system from automatically arming and
triggering by using Override Mode. This is very useful when washing the
vehicle or having it serviced. In Override Mode, the security system will
not arm, even with the remote remote, but all convenience functions
(door locks, trunk release, etc.) will continue to work normally.
To enter or exit Override Mode:
1. Turn the ignition on.
2. Turn the ignition off.
3. Press and release the Override switch
within 10 seconds.
The status LED will light solidly if you are entering Override Mode, and
it will go out if you are exiting Override Mode.
To enter or exit Override Mode using the remote:
1. Open any vehicle door.
2. Press .
3. Press
4. Press again.
The status LED will light solidly if you are entering Override Mode, and
it will go out if you are exiting Override Mode.
12
DRW-35