Ccd Verification Operation - µ-Dimension AutoGet Wifi User Manual

AutoGetWifi Intelligent Fiber Endface Microscope

3.3.4CCD Verification operation

Verification method:
1.The adapter is connected to the clean ferrule of the end face. After clicking the "Verify" button,
the prompt "1st image captured, please rotate the fiber and capture again";
2. Click "OK", rotate the ferrule, and click the " Verify " button again, prompting "CCD Verifyfin-
ished";
3. Click "OK", the interface will display the location of the inherent dirty spots;
4. Intrinsic dirty points are not counted in the measurement results for the next measurement.
Figure3-18
26