Table of Contents
Advertisement
AutoGetWifi Intelligent Fiber Endface Microscope
5. Third acquisition image
The MT interface rotation nut mark value 3 is aligned with the dot. The device measurement button
is used to trigger image acquisition. If the acquisition fails or there are other abnormalities, please
select the Redo or Cancel measurement button.
6. View measurement results
After 3 times of image acquisition, the system automatically analyzes and displays the measure-
ment results. The measurement results can be viewed by clicking the toggle button as shown below.
The user can also view the complete measurement report by setting the auto save measurement
report path.
Figure3-11
Figure3-12
22
Advertisement
Table of Contents
