AutoGetWifi Intelligent Fiber Endface Microscope
3.2Device software interface
3.2.1 Device software main interface
Power on the device, enter the software main interface.
Figure3-1
Image display area: Display real-time images and measurement results.
Image sharpness:The progress bar green indicates that the image is in a clear state. Setting:
Software system settings and measurement task settings.
ID: ID number will be saved in data, report file
INC:The ID number is automatically increased after the measurement.
AF On: Auto focus switch.
Measurement results area: PASS or FAIL. Task:Measurement tasks can be selected. Save: Data or
report saving mode.
+:Image enlargement for easy viewing of end face details.
-
: Image reduction ferrule visible area becomes larger.
Layer on:When the mask layer is on, the measurement result is displayed as an image; When the
layer is off, only the actual measured image is displayed.
15