Fisher & Paykel DD24SDFTX9 Troubleshooting Manual page 3

Problem
it (DD*I models only)
Dishwasher is registering
taps and bumps as knocks
and pausing inadvertently
(DD*I models only)
Drawer will not open (no
beeping, no wash in
progress)
Power failure during wash
program
Continuous beeping with A/
F code in display (DD*C &
DD*A models only) OR
flashing wash modifier
indicators (DD*I & DD*D
models only)
Intermittent beeping
Dishwasher will not start
https://producthelp.fisherpaykel.com/us/Clean/DishDrawer%E2%84%A2/Single/DD24SDFTX9/User_Guide_DD24SDFTX9/06...
Possible Cause
Door knock sensor is
incorrectly installed or
calibrated.
Door knock sensor is
incorrectly installed or
calibrated.
Childlock feature is on.
Closed drawer auto lock is
on.
Power outage in your
home or area.
A fault has occurred
Dishwasher is in pause
mode.
Power supply is not
connected.
The drawer is not closed
properly
Keylock or Childlock
feature is on.
What to Do
Contact Customer Care.
Contact Customer Care.
Turn the Childlock off. See your Quickstart guide for
instructions.
Press any button and open drawer within 30
seconds. DD*I models only: Knock once on the
door and open drawer within 30 seconds
Wait until power resumes, program will restart in
same part of wash program.
Refer to section 'If there is a fault'.
DD*C, DD*A and DD*D models: Close the
dishwasher and press the
button to resume the program. DD*I & DD*D
models: Press
on the control panel then close the drawer to
resume the program.
Connect the power supply.
Ensure the drawer is firmly closed.
Turn the Keylock or Childlock off. See your
Quickstart guide for instructions.
Press the
Updated: Tue, 16 Nov 2021 11:16:45 GMT
Powered by
3