Fisher & Paykel OR90 Using Manual page 14

To Select the Bridging Function
1. Place the pan on the cooktop over the two zones you wish to use, covering both cooking zones (as shown
above).
2. Turn both control dials for the selected cooking zones anticlockwise to the highest heat setting 9.
3. Turn both dials to
and hold until
appears in the cooking zone displays and the displays stop flashing.
◦ The front cooking zone display will show the heat setting.
◦ The rear cooking zone will show
.
4. Use the front cooking zone control dial to adjust the heat setting for the bridged zone.
◦ Adjusting the rear cooking zone will cancel bridging.
If no Pan is Detected
If no pan is detected on either cooking zone the front cookingzone display will alternate between the selected setting
and
https://producthelp.fisherpaykel.com/au/Cook/Freestanding_Cookers/Induction/OR90SCI4B1/User_Guide_OR90SCI4B1/05_...
Updated: Thu, 04 Nov 2021 16:39:30 GMT
Powered by
14