Fisher & Paykel OR90 Using Manual page 11

• If one cooking zone is set to PowerBoost and you accidentally also set a second cooking zone immediately in
front or behind to PowerBoost, the first cooking zone will warn you that the configuration is not possible, flash
and then automatically reduce its power level.
• When a cooking zone is set for PowerBoost, the cooking zone immediately in front of or behind may
automatically reduce its power level.
• PowerBoost is not available if cooking zones are bridged.
Using the Auto RapidHeat Feature
This feature lets you rapidly heat up food or liquid then automatically reduce the temperature to a pre-selected heat
setting.
To Set a Cooking Zone for Auto RapidHeat
1. Turn the control dial anticlockwise to A.
• Hold the dial at A until
appears in the cooking zone display
https://producthelp.fisherpaykel.com/au/Cook/Freestanding_Cookers/Induction/OR90SCI4B1/User_Guide_OR90SCI4B1/05_...
2. Turn the control dial to the desired heat setting (1-8).
• The heat setting and
will alternate in the display.
• Auto RapidHeat is now set.
Updated: Thu, 04 Nov 2021 16:39:30 GMT
Powered by
11