System Information; Options; Tab. 1: Options - E.E.P.D. Getting Started Guide Device Reference Manual

System Information

Required Tools
For the installation of the EM PRO system the following standard tools are
recommended:
•
Cable connection: Slot screwdriver
•
Socket wrench 5.5 mm
•
Torx screwdriver T10
Other required tools are depending on the installation place and method.
External Notice
All external documentation to install the EM PRO system should be obeyed.
Software
Supported operating systems are:
Microsoft® Windows® 10
Microsoft® Windows® 10 IoT Enterprise
Linux Ubuntu 20.04 LTS.
E.E.P.D. GmbH | Gewerbering 3 | 85258 Weichs
Copyright © 2021 by E.E.P.D. GmbH. All rights reserved. | Rev.1.2
EM PRO midi E Device Reference Manual – P – Revision 1

Options

Options
Memory*
SSD*
Operating System*
*factory assembled on request
# ODM option

Tab. 1: Options

8
Description
V2000 processors: Max. 32 GB dual-
channel DDR4 SODIMM up to 3200 MT/s,
with ECC-support
64 GB – 2 TB
Windows® 10, Windows® 10 IoT
Enterprise, Linux Ubuntu 20.04 LTS