Uefi/Bios; Entering Setup - E.E.P.D. Getting Started Guide Device Reference Manual

UEFI/BIOS

The UEFI/BIOS ROM has a built-in Setup program that allows users to modify
the basic system configurations. This type of information is stored in
batterybacked CMOS RAM, so that Setup information is retained when the
power is turned off.
E.E.P.D. GmbH | Gewerbering 3 | 85258 Weichs
Copyright © 2021 by E.E.P.D. GmbH. All rights reserved. | Rev.1.2
EM PRO midi E Device Reference Manual – P – Revision 1

Entering Setup

Power on the board and press and hold [ESC] immediately to enter Setup.
21