Safety Instructions - E.E.P.D. Getting Started Guide Device Reference Manual

Safety Instructions

Safety of People
The product generates considerable heat. The housing
transports this heat to the environment and thus becomes hot.
Take care if you touch the housing as this may cause burns!
Please follow all safety instructions at the installation site.
Make sure that no or only necessary cables are connected to
the BoxPC during installation.
If access to the BoxPC interfaces is not available after
installation, all necessary connections must be made before.
E.E.P.D. GmbH | Gewerbering 3 | 85258 Weichs
Copyright © 2021 by E.E.P.D. GmbH. All rights reserved. | Rev.1.2
EM PRO midi E Device Reference Manual – P – Revision 1
Device Safety
The BoxPC operates exclusively within the specified DC
voltage range. Repair work should only be made by an
authorized and certified specialty retailer or by the
manufacturer's customer service. Do not open the device to
avoid damage.
Modifications that have not been approved by the
manufacturer void the warranty. Dust, dirt, moisture, and
extreme temperatures may significantly impair proper
operation.
The device may only be opened by a qualified person.
Cooling System
The BoxPC consists of a compact, robust metal housing with
ventilation holes. It is equipped with an automated fan. To
ensure sufficient heat dissipation, never cover the ventilation
holes of the case. Do not place any objects onto the device.
7