Tab. 20: Uart Port 1 Configuration - E.E.P.D. Getting Started Guide Device Reference Manual

BIOS Settings
UART Port 1
Base I/O Address
Interrupt
Peripheral Type

Tab. 20: UART Port 1 Configuration

E.E.P.D. GmbH | Gewerbering 3 | 85258 Weichs
Copyright © 2021 by E.E.P.D. GmbH. All rights reserved. | Rev.1.2
EM PRO midi E
<Disabled>
<Enabled>*
<3F8h>*
<2F8h>
<3E8h>
<2E8h>
<338h>
<228h>
<220h>
<238h>
<IRQ3>
<IRQ4>*
<IRQ6>
<IRQ7>
<IRQ11>
<RS232>*
Device Reference Manual – P – Revision 1
Options
52
Description
Configure UART Port using options:
[Disabled] Disable device
[Enabled] Enable device and use below settings
System I/O base resources
System interrupt resources
Port Mode: RS232