EM PRO midi E Device Reference Manual – P – Revision 1 Manufacturer General Notes This user manual is for your information only. E.E.P.D. Electronic Equipment Produktion & Distribution GmbH The information contained herein has been checked carefully and is believed Gewerbering 3 to be reliable.
Page 3
EM PRO midi E Device Reference Manual – P – Revision 1 Disclaimer FCC and CE Disclaimer This document is provided for the general information of the customer. It E.E.P.D. GmbH gives no warranty at all that their products will meet the FCC describes the general functionality of the system and is not considered as and CE standards when used in combination with other third party products assured characteristics.
Page 4
EM PRO midi E Device Reference Manual – P – Revision 1 Disposal of Device At the end of the lifetime please dispose and/or recycle the components of the device accordingly. Technical Support For technical information about hardware and software please contact: support@eepd.de E.E.P.D.
EM PRO midi E Device Reference Manual – P – Revision 1 Table of Contents Power Connector (DC).................. 18 General Notes ....................1 RS232 Port 1 ....................19 Symbols ......................6 RS232 Port 2 ....................19 Safety Instructions ..................7 Front USB-C Port (max.
EM PRO midi E Device Reference Manual – P – Revision 1 Symbols The red danger sign warns you if incorrect operation puts your life or health at great risk. Both the components and the peripherals could be destroyed. The orange warning sign warns you that an incorrect or missing operation could seriously endanger your health or destroy the used components.
EM PRO midi E Device Reference Manual – P – Revision 1 Safety Instructions Device Safety Safety of People The BoxPC operates exclusively within the specified DC The product generates considerable heat. The housing voltage range. Repair work should only be made by an transports this heat to the environment and thus becomes hot.
EM PRO midi E Device Reference Manual – P – Revision 1 Options System Information Required Tools Options Description V2000 processors: Max. 32 GB dual- For the installation of the EM PRO system the following standard tools are Memory* channel DDR4 SODIMM up to 3200 MT/s, recommended: with ECC-support SSD*...
EM PRO midi E Device Reference Manual – P – Revision 1 Accessories Intended Use For accessories please contact our sales department. The EM PRO midi is a personal computer to be used with Windows 10, Windows 10 IoT Enterprise or Ubuntu Linux 20.04 LTS. It has been designed for office and workshop environments.
EM PRO midi E Device Reference Manual – P – Revision 1 Scope of Delivery Before you begin installation, please check that your shipment is complete and contains the items listed on the delivery note. Type Label Fig. 1: Type label 1 –...
EM PRO midi E Device Reference Manual – P – Revision 1 Technical Data • • Mounting: stand alone AMD V2000 processor series: • Dimensions approx.: 111 x 117 x 201 mm V2516 / 6C / 12T / 2.1 GHz – 3.95 GHz / 10 – 25 W •...
EM PRO midi E Device Reference Manual – P – Revision 1 Interfaces Front View Connection Overview The EM PRO midi BoxPC is equipped with the following standard interfaces: 1 – 2x Mini-DP++ connector 2 – Dual-USB 3.1 Gen2 port, type A (900mA each) 3 –...
EM PRO midi E Device Reference Manual – P – Revision 1 Power Button with LED The Power Button has an integrated LED that lights up a green ring around the Power button when the system is turned on. Press the power button (Fig.8) once to switch the computer on and off. Press and hold the power button (>4 Sec.) to hard power off the system in an emergency.
EM PRO midi E Device Reference Manual – P – Revision 1 Important Note: Connections There are two kinds of DisplayPort cables available: MiniDisplay Ports Cables for direct connection to a MiniDisplay Port monitor Standard pin assignment with Pin 20 on both ends of the cable NOT connected. Cables for use with dongles (e.
EM PRO midi E Device Reference Manual – P – Revision 1 2.5 Gigabit Ethernet Dual-Port Power Connector (DC) Standard pin assignment Fig. 13: Power connector schematic Fig. 12: Dual-Ethernet detail Counterpart - plug: CUI Devices Power Plug ID 2.5mm, AD 5.5mm Yellow LED Ordering number: PP3-002B Speed-LED is on during 2.5 or 1 Gbit transmission and switched off during...
EM PRO midi E Device Reference Manual – P – Revision 1 RS232 Port 1 RS232 Port 2 9-pin D-Sub Signal 9-pin D-Sub Signal Tab. 4: Pin assignment RS232 Tab. 5: Pin assignment RS232 Front USB-C Port (max. 1.5A) Standard pin assignment Fig.
EM PRO midi E Device Reference Manual – P – Revision 1 Commissioning Switching on the device / Operation After all preparations have been made, the system is ready to be connected If connections are no longer accessible after system installation, to the power supply.
EM PRO midi E Device Reference Manual – P – Revision 1 UEFI/BIOS Entering Setup The UEFI/BIOS ROM has a built-in Setup program that allows users to modify Power on the board and press and hold [ESC] immediately to enter Setup. the basic system configurations.
EM PRO midi E Device Reference Manual – P – Revision 1 BIOS Settings Options Description Select the current default language used by the Language <English>* InsydeH2O. This is the help for the hour, minute, second field. System Time No options Valid range is from 0 to 23, 0 to 59, 0 to 59.
EM PRO midi E Device Reference Manual – P – Revision 1 BIOS Settings Options Description PCI Express Configurations No options PCI Express Configurations Boot Configuration No options Configures Boot Settings. Peripheral Configuration No options Configures the peripheral devices. Select the IDE controller and hard disk drive type IDE Configuration No options installed in your system...
EM PRO midi E Device Reference Manual – P – Revision 1 BIOS Settings Options Description <Disabled>* Enable/Disable TPM physical presence. Need to Trust Platform Module <Enable discrete TPM> reboot when set from disable to enable before <Enable firmware TPM> selecting TPM Operation.
EM PRO midi E Device Reference Manual – P – Revision 1 BIOS Settings Options Description <Disabled> AUTO: Auto detect the SATA controller. SATA <Auto>* DISABLED: Disable the SATA controller <IDE> SATA Configure as Set SATA Configure Type <AHCI>* Sata Controller No options Enable/Disable SATA Controller Serial ATA Port 0...
EM PRO midi E Device Reference Manual – P – Revision 1 BIOS Settings Options Description <Disabled> SATA Port 0 SATA Port 0 Enable/Disable <Enabled>* <Disabled> SATA Port 1 SATA Port 1 Enable/Disable <Enabled>* <Disabled> SATA Port 0 SATA Port 0 Enable/Disable <Enabled>* Tab.
EM PRO midi E Device Reference Manual – P – Revision 1 BIOS Settings Options Description In order to not exclude yourself from using input <Disabled> USB 3.1 Rear VCC device in OS, at least one USB port should be <Enabled>* enabled at all times! In order to not exclude yourself from using input...
EM PRO midi E Device Reference Manual – P – Revision 1 BIOS Settings Options Description High Precision Event Timer is supported in Windows Vista or above. HPET controller should <Disabled> HPET - HPET Support not been seen in Windows XP no matter <Enabled>* enable/disable in SCU.
EM PRO midi E Device Reference Manual – P – Revision 1 BIOS Settings Options Description <Disabled>* PIC Watchdog Enable/Disable the PIC watchdog <Enabled> Adjust value [30-254] Seconds before PIC watchdog times out. Watchdog Timeout (s) Default value [40] Range 30-254 seconds. Tab.
EM PRO midi E Device Reference Manual – P – Revision 1 BIOS Settings Options Description Configure UART Port using options: <Disabled> UART Port 1 [Disabled] Disable device <Enabled>* [Enabled] Enable device and use below settings <3F8h>* <2F8h> <3E8h> <2E8h> Base I/O Address System I/O base resources <338h>...
EM PRO midi E Device Reference Manual – P – Revision 1 BIOS Settings Options Description Configure UART Port using options: <Disabled> UART Port 2 [Disabled] Disable device <Enabled>* [Enabled] Enable device and use below settings <3F8h> <2F8h>* <3E8h> <2E8h> Base I/O Address System I/O base resources <338h>...
EM PRO midi E Device Reference Manual – P – Revision 1 BIOS Settings Options Description <Not Detected> Current TPM Device <TPM 1.2> Current TPM Device: TPM1.2, or TPM2.0. <TPM 2.0>* Install or Change the password and the length of Set Supervisor Password None password must be greater than one character.
EM PRO midi E Device Reference Manual – P – Revision 1 BIOS Settings Options Description <No Operation>* <Enable_BlockSIDFunc> Change BlockSID actions, <Disable_BlockSIDFunc> Includes enable or disable BlockSID, TCG Storage Action <PPRequiredForEnableBlockSID_True> Require or not require physical presence when <PPRequiredForEnableBlockSID_False> remote enable or disable BlockSID <PPRequiredForDisableBlockSID_True>...
EM PRO midi E Device Reference Manual – P – Revision 1 BIOS Settings Options Description <Disabled>* Auto wake on S5, By Day of Month or Fixed time of Auto Wake on S5 <By Every Day> every day <By Day of Month> Tab.
Page 64
EM PRO midi E Device Reference Manual – P – Revision 1 BIOS Settings Options Description <Dual Boot Type> Select boot type to Dual type, Legacy type or UEFI Boot Type <Legacy Boot Type> type <UEFI Boot Type>* Allows InsydeH2O to skip certain tests while <Enabled>* Quick Boot booting.
EM PRO midi E Device Reference Manual – P – Revision 1 Determine EFI device first or legacy device first. If <Disabled> EFI Device First enable, it is EFI device first. If disable, it is Legacy <Enabled>* device first. <Enabled>* If enabled the system firmware does not initialize UEFI OS Fast Boot <Disabled>...
EM PRO midi E Device Reference Manual – P – Revision 1 BIOS Settings Options Description AMD Firmware Version No options Show all of AMD Firmware Version <Force PCIE> M.2 Key M SATA/PCIE Selection usage: SATA, M.2 Key M SATA/PCIE Selection <Force SATA>...
EM PRO midi E Device Reference Manual – P – Revision 1 BIOS Settings Options Description CPU Common Options No options CPU Common Options NBIO Common Options No options NBIO Common Options FCH Common Options No options FCH Common Options Tab.
EM PRO midi E Device Reference Manual – P – Revision 1 BIOS Settings Options Description <Auto>* <iGPU Disabled> iGPU Configuration <UMA_SPECIFIED> UMA Mode <UMA_AUTO> <UMA_GAME_OPTIMIZED> <Legacy> UMA Legacy Version <Non-Legacy> UMA Version UMA Non Legacy Version <Hybrid Secure> Hybrid Secure <Auto>* <Disabled>...
EM PRO midi E Device Reference Manual – P – Revision 1 BIOS Settings Options Description CPU and Auxiliary Fan Control No options CPU and Auxiliary Fan Control Warning: Select System Configuration may cause <35W POR Configuration> the system to hang, as some System Configuration System Configuration <45W POR Configuration>...
EM PRO midi E Device Reference Manual – P – Revision 1 BIOS Settings Options Description User can set: <Optimized Cooling>* Optimized Cooling <Silent Mode> Silent Mode Less noise CPU Fan Control <Maximum Cooling> Maximum Cooling Always on <No Cooling>...
EM PRO midi E Device Reference Manual – P – Revision 1 BIOS Settings Options Description Exit Saving Changes Exit system setup and save your changes. Save Change Without Exit Save your changes and without exiting system. Exit Discarding Changes Exit system setup and without saving your changes.
EM PRO midi E Device Reference Manual – P – Revision 1 Index of Figures Fig. 29: NUCE options .................. 47 Fig. 1: Type label ..................10 Fig. 30: SIO SCH3223 .................. 49 Fig. 2: Dimensions front side, all values [mm] approx........11 Fig.
EM PRO midi E Device Reference Manual – P – Revision 1 List of Abbreviations Alternating current APAC Asia Pacific and countries BIOS Basic input/output system Bluetooth Direct current DDR4 Fourth generation „double data rate“ memory technology Display port EMEA Europe, Middle East, Africa Ground GNSS...