E.E.P.D. Getting Started Guide Device Reference Manual page 64

EM PRO midi E
BIOS Settings
Boot Type
Quick Boot
Quiet Boot
Network Stack
PXE Boot capability
Power Up In Standby Support
Add Boot Options
ACPI Selection
USB Boot
E.E.P.D. GmbH | Gewerbering 3 | 85258 Weichs
Copyright © 2021 by E.E.P.D. GmbH. All rights reserved. | Rev.1.2
Device Reference Manual – P – Revision 1
Options
<Dual Boot Type>
<Legacy Boot Type>
<UEFI Boot Type>*
<Enabled>*
<Disabled>
<Enabled>*
<Disabled>
<Disabled>*
<Enabled>
<Disabled>*
<Enabled>
<Disabled>*
<First>
<Last>
<Auto>*
<Acpi4.0>
<Acpi5.0>*
<Acpi6.0>
<Acpi6.1>
<Acpi6.2>
<Acpi6.3>
<Enabled>*
<Disabled>
63
Description
Select boot type to Dual type, Legacy type or UEFI
type
Allows InsydeH2O to skip certain tests while
booting. This will decrease the time needed to boot
the system.
Disables or enables booting in Text Mode.
Network Stack Support:
Windows 8 BitLocker Unlock
UEFI IPv4/IPv6 PXE
Legacy PXE OPROM
Disabled : Support Network Stack
UEFI PXE : IPv4/IPv6
Legacy : Legacy PXE OPROM only
Disable or enable Power Up In Standby Support.
The PUIS feature set allows devices to be
powered-up into the Standby power management
state to minimize inrush current at power-up and to
allow the host to sequence the spin-up of devices.
Position in Boot Order for Shell,Network and
Removables
Select booting to Acpi3.0/Acpi1.0B
Disables or enables booting to USB boot devices.