Tab. 11: Ide Configuration - E.E.P.D. Getting Started Guide Device Reference Manual

BIOS Settings
SATA
SATA Configure as
Sata Controller
Serial ATA Port 0 [Not Installed]
Serial ATA Port 1 [Not Installed]
Serial ATA Port 2 [Not Installed]

Tab. 11: IDE Configuration

E.E.P.D. GmbH | Gewerbering 3 | 85258 Weichs
Copyright © 2021 by E.E.P.D. GmbH. All rights reserved. | Rev.1.2
EM PRO midi E
<Disabled>
<Auto>*
<IDE>
<AHCI>*
No options
No options
No options
No options
Device Reference Manual – P – Revision 1
Options
34
Description
AUTO: Auto detect the SATA controller.
DISABLED: Disable the SATA controller
Set SATA Configure Type
Enable/Disable SATA Controller
Serial ATA Port 0 Device configuration
Serial ATA Port 1 Device configuration
Serial ATA Port 2 Device configuration