Table of Contents
Advertisement
[Caution]
[Related Commands]
[Example]
• Because frequent writing in the non-volatile memory can
destroy the memory, the writing command should be used
less than 10 times a day.
• Just after the completion of the writing operation into the non-
volatile memory, the printer hardware will be reset. Therefore,
download characters, download bit images, and macro
definition will be made undefined. The receiving buffer/printer
buffer will be cleared, and each setting will go back to its default
value. Then the status of dip switches will be checked once
more.
• It may happen that the printer becomes BUSY during the
process of writing data into the non-volatile memory in the
execution of this command. When the printer becomes BUSY,
it will stop receiving data. Therefore, sending data from the
host (Including real time command) is prohibited.
FS p
(xL + xH
256)
8dots = 512dots
When xL =64, xH = 0, yL = 96, yH = 0
— 102 —
Advertisement
Table of Contents
