Table of Contents
Advertisement
GS R 1 n
[Function]
[Code]
[Range]
[Outline]
[Caution]
[Default]
[See Also]
Setting receipt collection timer
<1D>H<53>H<31>H<n>
0
n
9
• This command is valid only when the collection function of
the DIP switch is enabled.
• This command sets the wait time till the receipts are collected
automatically.
• If n=1 to 9, n
2.5 sec is set. If n=0, receipts are not collected
automatically.
• This command is ignored in any of the following cases.
(1) There is no paper in the presenter.
The state where no eject command is received or receipt
has already been removed.
(2) A command related to the next printing has been received.
The state where a command related to the next printing
has already been received.
This command is ignored when the collecting function of the
DIP switch is disabled.
n=0
GS R 0 n
— 70 —
Advertisement
Table of Contents
