Table of Contents
Advertisement
operating instructions since improper adjustment of other controls may
result in damage and will often require extensive work by a qualified
technician to restore the product to normal operation.
e.
If the product has been dropped or the cabinet has been damaged.
f.
If the product exhibits a distinct change in performance, indicating a
need for service.
14. This plug is not waterproof - keep it dry
15. The power cord is already fitted with a moulded plug incorporating a
fuse, the value of which is indicated on the pin face of the plug. Should
the fuse need to be replaced, an ASTA approved BS1362 fuse must
be used of the same rating, marked thus. If the fuse cover is detach-
able, never use the plug with the cover omitted. If a replacement fuse
cover is required, ensure it is of the same colour as that visible on the
pin face of the plug (i.e. red or orange). Fuse covers are available
from the Parts Department indicated in your user instructions.
16. If the plug supplied is not suitable for your socket outlet, it should be
cut off and destroyed. A plug with bared flexible cords is hazardous if
engaged in a live socket outlet. The end of the flexible cord should be
suitably prepared and the correct plug fitted.
17. The wires in this mains cord are coloured in accordance with the
following code:-
Green/Yellow = Earth, Blue = Neutral, Brown = Live. As these colours
may not correspond with the coloured markings identifying the termi-
nals in your plug, proceed as follows:-
The wire which is coloured Green/Yellow must be connected to the
terminal in the plug which is marked with the letter E or by the earth
symbol or coloured Green or Green/Yellow. The wire which is col-
oured Blue must be connected to the terminal which is marked with a
letter N or coloured Black or Blue. The wire which is coloured Brown
must be connected to the terminal which is market with the letter L or
coloured Brown or Red.
18. Important: This appliance must be earthed
- 6 -
Advertisement
Table of Contents
