Table of Contents
Advertisement
Here is an example:
The length of one page is the distance from the edge of the passbook to
the centre line of the opened book, as shown above. In this case, the
passbook is 85mm per leaf or page.
85mm ÷ 25.4 = 3.346 inches x 6 lines per inch = 20.08 (approx. 20).
So a PB Length value of 020/6" would be selected.
Example program or using Passbook1 mode
The following program prints lines of "H" characters across the passbook
page but also shows examples of selecting Passbook1 mode of printing
using the special unique programming commands:
CLS
WIDTH LPRINT 255
LPRINT CHR$(&H1B);"~A";
LPRINT CHR$(&H1B);"81";CHR$(2);
LPRINT CHR$(&H1B);"00";CHR$(0);
LPRINT CHR$(&H1B);"~GM";CHR$(3);CHR$(0);
LPRINT CHR$(&H1B);"U";CHR$(1);
FOR A=1 TO 3
LPRINT
NEXT A
GOSUB HHH
FOR B=1 TO 4
LPRINT
NEXT B
GOSUB HHH
LPRINT CHR$(&HC)
END
HHH:
FOR C = 1 TO 14
LPRINT STRING$(30,"H")
NEXT C
RETURN
Note 1: This section of the program sets the Skew Detection function to
the "ADJUST" mode. Alternatively, this may also be adjusted using the
control panel menu system instead.
- 25 -
}
} Note 1
}
- Note 2
- Note 3
Advertisement
Table of Contents
