Table of Contents
Advertisement
PARK/LOAD
(3 seconds)
PARK/LOAD
+ONLINE
PARK/LOAD
+DRAFT/LQ
LF/FF
DRAFT/LQ
Default Configuration Report
Extra items have been added to the configuration report for the Prodot 350
to cater for the passbook printing capabilities, the automatic head gap
adjustment and the skew correction function.
A default configuration report is shown overleaf:
In the off-line mode, pressing and holding down the PARK/
LOAD key for about 3 seconds toggles between cut-sheet
and tractor paper mode.
In the off-line mode, pressing and holding down the
PARK/LOAD and ONLINE keys for about 3 seconds
moves the printhead left and right several times to aid in
ribbon installation and seating.
In the off-line mode, pressing and holding down the
PARK/LOAD and DRAFT/LQ keys for about 3 seconds
enters automatic passbook length measuring mode..
In the off-line mode, pressing the LF/FF key advances
tractor paper and cut sheets by one line. Pressing and
hold this switch feeds tractor paper to the tear-off position.
If you press LF/FF key again, the paper is fed backwards
to the second line of next page.
In the off-line mode, pressing draft toggles between
DRAFT and LQ mode.
- 21 -
Advertisement
Table of Contents
