Table of Contents
Advertisement
Chapter 6
Passbook Printing
Passbook Printing Configuration
To configure the printer to handle vertical passbooks, the following items in
the control panel setup menu must be changed:
Head Gap
This determines the operation of the media gap sensor.
There are 5 options:
Auto One
Auto All
Fix Pos
Passbook1
Passbook2
Gap Pos.
This selects the fixed heap gap value when using the "Fix
Pos" Head Gap.
PB Length
This sets the fixed passbook length in values from 2
inches to 4 inches, in one-sixth inch increments.
Cross Page
When enabled, causes the printer to increase the heap
gap to the maximum value while the printer skips over the
perforations between continuous paper sheets.
Skew Correct Enables or disables the shutter mechanism operation for
straightening media not correctly inserted.
detects the paper thickness when the
printer starts printing each page
detects the paper thickness on each line
printed
Fixes the head gap to a particular value as
determined by the "Gap Pos" value
is used for measuring the length of the
passbook automatically
is used for presetting the length of the
passbook using the "PB Length" value.
- 23 -
Advertisement
Table of Contents
