Related Manuals for Citizen JR20-M01
Summary of Contents for Citizen JR20-M01
- Page 1 User’s Manual JR20-M01 Version 1.00...
- Page 2 ●Concerning Copyright The copyrights for this document are the property of CITIZEN SYSTEMS JAPAN CO.,LTD.. Reproduction of any or all of the contents of this document without consent of the company is a violation of copyright law. However, one back-up copy may be made for non-commercial, personal purposes.
-
Page 3: Introduction
Introduction Thank you for purchasing this device. This document explains the handling and operation required to use this printer. Please read this document well before use. Be sure to read “For Safe Operation” (Pg 2-4), and operate the printer correctly. For Safe Operation ・... - Page 4 WARNING ・ Use only with the designated voltage and frequency. Improper connection could cause electric shock or fire. ・ Avoid overstressing outlets and using extension cords. The outlet could overheat and cause a fire. ・ Do not damage, destroy, bundle, or alter the power cord. Also, placing heavy objects on, pulling on, or bending the cord excessively can damage it, and could cause a fire.
- Page 5 CAUTION ・ Do not set the printer up in dusty or overly humid places. This could cause fire or electric shock, or damage the printer. ・ Do not set the printer up on an unstable surface. It could fall and cause injury to the user or others. ・...
-
Page 6: Cautions For Set-Up
Cautions for Set-up ・ Prior to operation, read “For Safe Operation” carefully and observe the rules therein. ・ Use care when moving the printer. Never try carrying the printer alone. Dropping it could cause injury or damage to other property. ・... -
Page 7: Regulatory Compliance Statements
Regulatory compliance statements American users FCC part 15 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. -
Page 8: Declaration Of Conformity ・・・・・・・・・・・・・・・・・・・・・・・7
Declaration of Conformity European users Hereby, CITIZEN SYSTEMS JAPAN CO.,LTD., declares that this digital color printer is in compliance with the essential requirements and other relevant provisions of Dir ective 1999/5/EC. -
Page 9: Table Of Contents
Introduction・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 2 For Safe Operation・・・・・・・・・・・・・・・・・・・・・・・・・・ 2 Cautions for Set-up ・・・・・・・・・・・・・・・・・・・・・・・・・・ 5 Regulatory compliance statements ・・・・・・・・・・・・・・・・・・・・ 6 Declaration of Conformity ・・・・・・・・・・・・・・・・・・・・・・・7 Table of Contents ・・・・・・・・・・・・・・・・・・・・・・・・・・ 8 Setting Up the Printer Checking the Contents ・・・・・・・・・・・・・・・・・・・・・・・ 9 Names of Components・・・・・・・・・・・・・・・・・・・・・・・・ 10 Connecting・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 11 Paper, Ribbon・・・・・・・・・・・・・・・・・・・・・・・・・・・... -
Page 10: Checking The Contents
Please check that the printer and all accessories are included in the package. Paper Holder Scrap Box Printer Unit Power Cord (*) Paper Tray (*) CD (*) For Safe Operation (*) User’s Manual Start-up Guide (*) Printer Driver (*) mark accessories may not be contained by the destination. Packing material packing material. -
Page 11: Names Of Components
[Front of Unit] Open Lever Print Feed Out Thermal print head Scrap Box Platen Roller [Back of Unit] USB port Ventilation [Side of Unit] Power Switch Power Plug Socket Ventilation CAUTION ・ Please be careful not to hurt yourself or damage anything on the edges of the printer. -
Page 12: Connecting
1. Make sure that both the printer and computer power switches are set to the OFF position. 2. Plug the cord connector end into the printer Power Plug Socket. 3. Plug the cord into the wall outlet. 4. Connect the USB cable to the printer and the computer. 5. -
Page 13: Paper, Ribbon
Type L (5x3.5), 2L (5x7) PC (6x4), A5 (6x8) Paper Width: 127mm Width: 152mm Ribbon Width: 134mm Width: 159mm CAUTION ・ Set the paper and ribbon without putting them directly on the work surface. Any dust or dirt could get inside the printer and adversely affect the print quality. ・... -
Page 14: Setting The Media
1. Release the Open Lever, and open the front cover. Open Lever 2. Set the paper to the paper holder. When setting it, make sure there are no gaps between the paper and the holder. Make sure the paper is not sticking out. If the end of roll is uneven (with paper sticking out), remove it from the holder, and flatten it. - Page 15 4. Remove a paper fixed tape, and fit the paper to the proper position for each size. L size and 2L size correspond to the line of L, and PC size and A5 size correspond to the line of PC. 5.
- Page 16 7. Close the front cover. When the front cover is closed, the paper initialization process will be carried out (5 blank sheets will be fed out). * In order to facilitate media color adjustment, media type recognition, and print quantity management, an IC chip is built into the ink ribbon.
- Page 17 9. Attach the Paper Tray to the Scrap Box. ※The tray can hold about 50 photos, but please remove them frequently. CAUTION ・ Use with sizes other than L or PC, or allowing too many photos to accumulate could cause problems. Moreover, there is a possibility that a paper tray may be damaged.
-
Page 18: Trouble-Shooting
The flashing LED indicates the printer status LED display Status Solution Power Ribbon Paper Error Paper End ● Put in a new roll of paper Ribbon End ● Put in a new roll of ribbon Door is Open ● Set the paper properly and close the front cover (No paper) Door is Open ●... -
Page 19: Solving Media Errors
1. Release the Open Lever, and open the front cover. 2. Remove the ribbon. a. If the paper is jammed: 1. Pull out any paper remaining in the printer, and cut off any wrinkled or partially printed areas evenly with scissors. - Page 20 b. If the ribbon is cut: Remove any ribbon remaining in the printer. 2. Remove any incomplete prints. If the next image is printed over the previous image, the ribbon may stick, and it may cause the paper to jam. Reattach the ribbon with cellophane (or similar) tape.
- Page 21 c. If the printer is stopped in the middle of cutting: 1. Turn the power back ON. Free the jammed paper, and return the cutter blade to its ready position. If the jammed paper cannot be freed, please contact a service representative. 2.
-
Page 22: Cleaning
If there is an indent on the pictures at a regular interval, or if the back of the picture (white side) is dirty, clean the platen roller. There may be dust, grime, adhesives, etc. from the ribbon or paper on the platen roller. 1. -
Page 23: Specifications
Model JR20-M01 Manufacturer CITIZEN SYSTEMS JAPAN CO., LTD. Print type Thermal dye sublimation transfer Print mode High-speed mode High quality mode Resolution 300 x 300dpi 300 x 600dpi Ribbon type YMC + overcoat Interface USB2.0 (Max 480Mbps) TYPE B connector...