Table of Contents
Advertisement
Insert the paper as shown in the
figure. The printer will automati-
cally pull the paper in to the printer
and correct any skewed paper to
ensure it is perfectly straight.
You can disable the skew correc-
tion function using the control
panel configuration as described in
Chapter 5.
Using Tractor Paper
To load tractor paper in to the printer, first turn the printer on.
Press the PARK/LOAD key to set
the paper select lever to the tractor
position as shown.
Note: You should NOT change
this setting manually. Always use
the control panel key.
This printer feeds tractor paper
from the rear of the printer to the
front.
Set the power cord into the groove
at the back of the lower case of
printer to avoid it fouling the paper
path.
- 14 -
Advertisement
Table of Contents
