TECHNICAL SPECIFICATIONS
For EMA transducer (EM1401, EM1401 UT)
Measured thickness range for steel
Measured thickness range without gap for steel
Thickness measurement error
Permissible gap between the sensor and the test object
for ЕМТ14012 transducer
Permissible gap between the sensor and the test object
for ЕТМ14013 transducer
Permissible skew of the sensor relative to the test object
surface normal
Minimum permissible radius of curvature of the test
object surface
Operating frequency
Working ambient temperature range
Operating temperature range of the test object surface
Maximum number of measurements per second
For PE transducer (EM1401 UT)
Measured thickness range for steel for EDC5P10FS15
transducer
Measured thickness range for steel for EDC5P7.2FS10
transducer
Measured thickness range for steel for EDC10P5F3
transducer
+7(812) 385-54-28
info@oktanta-ndt.ru
EM1401 / EM1401 UT EMA Thickness Gauge. Operation Manual.
2 to 80 mm
2 to 120 mm
0.08 mm
up to 4 mm
up to 6 mm
± 25
≥10 mm
4 MHz
-20 to +50C
-20 to +80C
(-20 to +750C
using the EMT14014Т
transducer*)
2 to 300 mm
1 to 150 mm
0.5 to 20 mm
16
5