Transducer Selection - OKTANTA EM1401 Operation Manual

Brightness
This item enables to set the percentage screen brightness. To change the value,
press the and
Restore default
This item enables to restore all defaults of the Device. To select this menu item,
press on the button.
About
This item enables to know the software version. To select this menu item, press
on the button.

Transducer Selection

The transducer is selected based on the test object temperature, base thickness,
surface quality, etc. The characteristics of all applicable sensors are given in the
Comparative table provide below:
Transducer Test object
temperature
range, C
from -20 to
EMT14012
+80
from -20 to
EMT14013
+80
+7(812) 385-54-28
info@oktanta-ndt.ru
EM1401 / EM1401 UT EMA Thickness Gauge. Operation Manual.
buttons.
Thickness Operating
range,
mm
from 2 to from 0 to
120 mm 4
from 2 to from 0 to
120 mm 6
Comparative table for transducer selection
gap, mm
Compact transducer, suitable for most of
applications. It is supplied together with
the Device as standard scope of supply.
The transducer has the enhanced
magnetic system and is used in such
cases when operation with the maximum
operating gap or on the objects with poor
surface quality due to heavy corrosion is
required.
Description
41