Information Display Mode Selection - OKTANTA EM1401 Operation Manual

Information Display Mode Selection

The Device allows to visualize A-scan, B-scan, and C-scan. To switch between
the information display modes, use the
to switch to the A-scan display mode.
Press the
Then, press the
+7(812) 385-54-28
info@oktanta-ndt.ru
EM1401 / EM1401 UT EMA Thickness Gauge. Operation Manual.
A-scan display mode
button again to switch to the B-scan display mode.
B-scan display mode
button again to switch to the C-scan display mode.
and buttons Press the button once
10