B-Scan Window - OKTANTA EM1401 Operation Manual

In the opened window, press the
the known thickness value; then press the
 Speed. This item enables to specify the acoustic speed.
The acoustic speed setting window is shown below:
In this window, press the
known acoustic speed value; then press the
All EMA transducers intended for this Device use transverse ultrasonic wave. The
typical speed of the transverse wave for the steel is 3250 m/s.
All PE transducers intended for this Device use longitudinal ultrasonic wave. The
typical speed of the longitudinal wave for the steel is 5950 m/s.

B-scan Window

The B-scan window appearance is shown in Figure below:
+7(812) 385-54-28
info@oktanta-ndt.ru
EM1401 / EM1401 UT EMA Thickness Gauge. Operation Manual.
Acoustic speed setting
,
, , , and
button.
, , and
button.
WARNING!
buttons to specify
buttons to specify the
27