Citizen iDP-3210 User Manual page 58

(32) Selecting Printing Position of HRI Characters (GS H n)
Code : [1d]H + [48]H + N
* {0 n 3} Data is described in Hex code.
Selecting printing position of HRI characters for printing bar codes.
l
"n" means the followings.
n (Hex)
0
1
2
3
l
The initial value of n is "0".
(33) Defining Download Bit Image (GS * n1 n2 Dn)
Code : [1D]h + [2A]h + n1 + n2 Dn
* {1 n1 FF}
Defines downloading bit images of the number of dots specified by n1/n2.
l
The numbers of dots are n1 x 8 in horizontal direction and n2 x 8 in vertical direction.
l
Dn indicates bit image data.
l
The download bit image thus defined remains effective until redefinition, ESC @
execution, ESC &, or power OFF takes place.
l
A download character and a download bit image cannot be defined simultaneously.
With this command executed, defined content of a download character is cleared.
l
Relations between the bit image data and the dot defined are shown below:
(34) Printing Download Bit Image (GS / m)
Code : [1D]h + [2F]h + m
* {0 m 3} Data is described in Hex code.
Prints download bit images in a mode specified by m.
l
Modes can be selected by m are shown table for selection with m are shown below.
m
0
1
2
3 Double wide/double high mode
l
When data exist inside the print buffer, this command is ignored.
l
When a download bit image has not been defined, this command is ignored.
l
A portion of a download bit image exceeding one line length is not printed.
l
A download character and a download bit image cannot be defined simultaneously.
CITIZEN
Printing Position
No printing
Above the bar code
Below the bar code
Both above and below the bar code
{1 n2 48}
{n1 x n2 1311} Data is described in Hex code.
MODE NAME
Normal mode
Double wide mode
double high mode
DOT DENSITY IN
VERTICAL DIRECTION
156 DPI
156 DPI
78 DPI
78 DPI
58
iDP-3210 User's Manual
DOT DENSITY IN
HORIZONTAL DIRECTION
154 DPI
77 DPI
154 DPI
77 DPI