Citizen iDP-3210 User Manual page 51

(14) Specifying/canceling highlighting (ESC E n)
Code : [1B]h + [45]h + n
* {0 n FF} Data is described in Hex code.
Specifying/canceling the highlighted characters.
l
"n" is valid only for the lowest bit (n0).
l
Control by the lowest bit (n0) is shown as follows:
n0
0
1
l
This is effective to all characters.
l
Dot configuration of a highlighted character includes one extra dot added at its side.
(15) Specifying/canceling Double Printing (ESC G n)
Code : [1B]h + [47]h + n
* {0 n FF} Data is described in Hex code.
Specifying/canceling the double printing.
l
"n" is valid only for the lowest bit (n0).
l
Control by n is shown as follows.
n0
0
1
l
The print result of Double printing and highlight character printing is completely same
.
(16) Printing and feeding paper n/203 inch (ESC J n)
Code : [1B]h + [4A]h + n
* {0 n FF} Data is described in Hex code.
Prints data inside the print buffer and feeds paper by n/156 inch.
l
Specified volume does not remain.
l
The beginning of the line is to be considered as the next printing start position.
CITIZEN
Type
Canceling highlighting.
Specifying highlighting.
Type
Canceling double printing.
Specifying double printing.
51
iDP-3210 User's Manual