System Requirements - Icom IC-PCR1000 Instruction Manual

IMPORTANT
READ ALL INSTRUCTIONS
fully and completely before using the receiver.
SAVE THIS INSTRUCTION MANUAL —
instruction manual contains important operating instructions
for the IC-PCR1000 COMMUNICATIONS RECEIVER FOR
COMPUTER.
USE
antenna(s), such as a well-matched 50
feedline. For radio communications, the antenna is of critical
importance, along with sensitivity.

SYSTEM REQUIREMENTS

• IBM PC compatible computer
• An RS-232C serial port
®
• Microsoft Windows
appropriate DOS
• Intel i486DX4 processor or faster
recommended)
• At least 16 MB RAM
• At least 10 MB of hard disk space
• 640 480 pixel display
i
and on-line help care-
antenna and
(38400 bps or faster)
® ®
95 or Microsoft Windows
(Pentium® 100 MHz or faster
(800 600 pixel display recommended)
FEATURES
• USER-SELECTABLE INTERFACE
Users can choose from 3 different operating screens de-
pending on their ability level and preference.
This
• WIDE FREQUENCY RANGE, MULTI-MODE RECEIVE
The IC-PCR1000 has a wide frequency coverage from 0.5
MHz to 1300 MHz* with all mode receive capability.
* Some frequency ranges are restricted depending on version.
• IF SHIFT
The IF shift function is effective in SSB mode for reducing in-
terference from nearby signals. It does so by electronically
shifting the passband of the IF filter.
• REAL-TIME BANDSCOPE FUNCTION
The real-time bandscope function makes it easy to find busy
frequencies and also easy to observe receive frequency band
conditions. The maximum band width is ±200 kHz.
• NOISE BLANKER • VSC (Voice Scan Control) FUNCTION
®
3.1 with
• S-METER SQUELCH
CIRCUIT • A VARIETY OF TUNING STEPS • A VARIETY OF
SCANS • DIGITAL AFC CIRCUIT
Versions of the IC-PCR1000 which display "CE" on the serial
number seal, comply with the essential requirements of the
89/336/EEC directive for Electromagnetic Compatibility.
• HIGH PERFORMANCE PLL