I Programmable Function Keys - Icom IC-F111S Instruction Manual

1
PANEL DESCRIPTION

I Programmable function keys

The following functions can be assigned to [P0], [P1], [P2]
and [P3] programmable function keys.
Consult your Icom Dealer or System operator for details con-
cerning your transceiver's programming.
In the following explanations, programmable function names
are bracketed. The specific switch used to activate the func-
tion depends on programming.
¡ ¡ CH UP AND DOWN KEYS
Select an operating channel.
CH UP
CH DN
¡ ¡ BANK KEY
Select and determine a bank number.
BANK
¡ ¡ SCAN START/STOP KEY
Push this key to start scanning; and push again
SCAN A
to stop.
SCAN B
NOTE: Place the microphone on hook to start
scanning.
Take the microphone off hook to stop scanning.
3
¡ ¡ SCAN TAG KEY
Adds or deletes the selected channel to the scan
TAG
group.
¡ ¡ PRIORITY CHANNEL KEYS
Push these keys to select priority A or priority B
PRI A
channel, respectively.
PRI B
¡ ¡ OPERATING CHANNEL KEYS
Select an operating channel directly.
CH1
CH2
CH3
CH4
¡ ¡ LOCK KEY
Push this key for 1 sec. to lock all programmable
LOCK
keys except the following:
• [ ] (incl. [CAL A] and [CAL B]), [
CALL
and [ ] keys.
EMER
]
MONI