Deleting A Service Template - IBM WorkPad Workpad Handbook

Delay
Get IP
Prompt
End
4. Repeat steps 2 and 3 until the login script is complete.
5. Tap OK.
Plug-in applications
You can create plug-in applications containing script commands that
extend the functionality of the built-in script commands. A plug-in
application is a standard PRC application that you install on your PC
companion just like any other application. After you install the plug-
in application, you can use the new script commands in a login script.
Plug-in applications have the following characteristics:
Written in C language
Compiled into a device executable
Called properly from a login script
Able to return control to a login script after it terminates
Created using a development environment that supports software,
such as Metrowerks CodeWarrior for Palm Platform.
For additional information on creating plug-in applications, send
e-mail to Palm Developer Support at devsupp@palm.com.

Deleting a service template

There is only one way to delete a service template: use the Delete
command from the Service menu.
To delete a service template:
1. Tap the Service pick list.
2. Tap the service template you want to delete.
Page 206
Tells your PC companion to wait a specific
number of seconds before executing the next
command in the login script.
Reads an IP address and uses it as the IP address
for your PC companion. This command is used
with SLIP connections.
Opens a dialog box and prompts you to enter
text of some kind (for example, a password or a
security code).
Identifies the last line in the login script.
Setting Preferences for Your PC Companion