IBM WorkPad Workpad Handbook page 172

Tip: For best results, PC companions should be between 10
centimeters (approximately 4 inches) and 1 meter
(approximately 39 inches) apart, and the path between the two
PC companions must be clear of obstacles. Beaming distance
to other Palm OS handhelds may be different.
5. Wait for the Beam Status dialog box to indicate that the transfer is
complete before you continue working on your PC companion.
To beam an application:
1. Open the Applications Launcher.
2. Tap the Menu icon
3. Tap App, and then tap Beam.
4. Select either Handheld or Card from the Beam From pick list.
5. Tap the application you want to transfer.
Note: Some applications are copy-protected and cannot be
beamed. These are listed with a lock icon next to them.
6. Tap Beam.
7. When the Beam Status dialog box appears, point the IR port
directly at the IR port of the receiving handheld.
8. Wait for the Beam Status dialog box to indicate that the transfer is
complete before you continue working on your PC companion.
To receive beamed information:
1. Turn on your PC companion.
2. Point the IR port directly at the IR port of the transmitting
handheld to open the Beam dialog box.
3. Select a category for the incoming information, create a new
category, or leave the information unfiled.
Page 162
.
Communicating Using Your PC Companion