Digitizer Preferences; Formats Preferences; Country Default - IBM WorkPad Workpad Handbook

Digitizer preferences

The Digitizer Preferences screen opens the digitizer calibration screen.
This is the same screen that appears when you start your PC
companion for the first time.
You can recalibrate your screen after a hard reset, or if your digitizer
drifts.

Formats preferences

Use the Formats Preferences screen to set the country default and the
display format of the dates, times, and numbers on your PC
companion.

Country default

The country default sets date, time, week start day, and number
conventions based on geographic regions where you might use your
PC companion. For example, in the United Kingdom, time often is
expressed using a 24-hour clock. In the United States, on the other
hand, time is expressed using a 12-hour clock with an AM or PM
suffix.
All your PC companion applications use the Country default settings.
You can, however, customize your own preferences as described in
"Time, date, week start, and numbers formats" later in this chapter.
To set the country default:
1. Tap the country name pick list.
2. Tap the setting you want to use.
Chapter 8 Page 189