IBM WorkPad Workpad Handbook page 167

Retrieve
Only Msgs
Containing
Defining filter strings
E-mail items are filtered based on the information contained in their
To:, From:, and Subj: fields. The information that defines what your
PC companion is looking for is called a filter string. You create a filter
string by listing the words you want your PC companion to find and
separating them with either a comma or a space. Each word in the
filter string is joined by an implicit OR, so you do not need to enter
logical connectors like AND or OR.
To create a more complex filter, you can define filter strings for the To:,
From:, and Subj: fields simultaneously. Your PC companion joins the
filter strings for these fields using an implicit AND; once again, you do
not need to add the logical connector. Your PC companion does that
for you.
For example, suppose you want to receive only e-mail items from John
Smith (jsmith@aol.com) or Jack Jones (jjones@aol.com) concerning the
Apollo Project. You would create the following filter strings:
In the To: field:
In the Subj: field:
Your PC companion interprets this as, "Accept e-mail items about the
Apollo Project from John Smith or Jack Jones. Do not accept e-mail
items from other people. Do not accept e-mail items from John or Jack
about any other subject."
When you define a string, note that your PC companion searches for
any instance of that sequence of characters. For example, if you create a
filter that retrieves only e-mail items containing the string "info," your
PC companion considers " info ," "ra info rest" and "k info lk"
appropriate matches.
Chapter 6
Tells your PC companion to include only the
e-mail items that meet the criteria you
define and to ignore all other e-mail items
during synchronization. This filter has the
potential to block more e-mail during
synchronization because it downloads only
one subset of e-mail.
jsmith@aol.com, jjones@aol.com
Apollo Project
Page 157